New Products
Out Of Stock
To relieve pressure when transferring or filtering beer from one keg to another. This connects to the keg you are filtering into and has an... more info
£22.00
Filter your tap water and eliminate that no-win decision of "should I buy expensive bottled water or use the chlorinated water from the tap.... more info
£40.00
Out Of Stock
Weldless Thermowell Kit has a 1/2" Female NPT (6" Probe). It's total length is 7" with the stem being 6" in length with an... more info
£12.00
This carboy thermowell is used in conjunction with a temperature controller to more accurately regulate internal temperature during fermentation. It... more info
£10.00
Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info
£10.00
Add a bulkhead to your kettle, fermentor or any thin walled container. This bulkhead fitting has all of the seals and lock nuts you will need, with... more info
£10.00
Made from Stainless Steel, designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go... more info
£7.00
Out Of Stock
This Carbonating Stone with 1/4″ MFL works great for both carbonating and oxygenating. In order to carbonate in your cornelius keg, simply connect... more info
£12.00
The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for premium... more info
£8.50
Out Of Stock
Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info
£11.50
Use this 2 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5... more info
£12.00
Out Of Stock
Thermowells are installed onto brewing pots and kettles to allow a thermometer probe or even a temperature controller sensor to be inserted through... more info
£14.00
These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These are much... more info
£1.00
Use the Keg Jumper to push beer or sanitizer from one keg to the next. Ideal for transferring beer off settled yeast to another keg or... more info
£18.00
Rinses your bottles in only a few seconds ! It´s so easy : connect it to a water tap push the bottle onto it during a few seconds and …... more info
£28.95
Fermonster lid with hole for your FerMonster™ 23 and 27 litres. *** NO O-RING IS INCLUDED *** more info
£7.75
Mash paddle for beer brewers, for stirring wort during mashing. With rounded corners to avoid scratches and height markings to enable easy measuring... more info
£16.95
82,944 different beer kits in one. Yes that’s how many different beer kits are possible with this kit. It can be a blonde ale, an IPA, an English... more info
£28.00