Fittings, The Homebrew Company

Fittings

1/2 inch NPS Locknut with Groove

1/2" NPS Stainless Steel Locknut Straight threaded with groove for o-ring. Fits the 1/2" Fitting sets. Will seat fully down any... more info

£2.00

Write Review

Add:

1/2 Inch NPT Flat Gasket

These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 1/2" NPT threaded components. These are much... more info

£1.00

Write Review

Add:

1/2 Inch NPT Silicone O-Ring

more info

£0.45

Write Review

Add:

1/2 Inch Tube Silicone O-Ring

more info

£0.45

Write Review

Add:

Out Of Stock

1/2" NPT Male x 1/2" Barb Straight Hose Fitting

Allows you to connect 3/8" or 1/2" ID tubing to the ball valve. more info

£4.00

Write Review

1/2" NPT Male x 3/8" Barb Straight Hose Fitting

Allows you to connect 3/8" or 1/2" ID tubing to the ball valve. more info

£4.00

Write Review

Add:

1/2" NPT Stainless Steel 3 Piece Ball Valve

Stainless Steel Construction 3 Piece Design Insulated Handle 1/2" Female NPT Threads more info

£25.00 £17.50
Save: 30%

Write Review

Add:

1/2"NPS Flange Locknut without Groove

1/2" NPS Stainless Steel FLANGE style Locknut . Straight threaded with flat flange, used with flat style gaskets. more info

£2.75

Write Review

Add:

1/4 Inch Tube Silicone O-Ring

more info

£0.45

Write Review

Add:

2 Piece Ball Valve -1/2" SS316

Full port stainless steel ball valves and a lock out handle. more info

£17.00

Write Review

Add:

3/4 Inch NPT Flat Gasket

These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These are much... more info

£1.00

Write Review

Add:

3/4 Inch NPT Silicone O-Ring

more info

£0.45

Write Review

Add:

3/8 Inch Tube Silicone O-Ring

more info

£0.45

Write Review

Add:

304 SS Weldless ball valve with Male QD - 1/2"

more info

£15.95

Write Review

Add:

90 Degree Inner Threaded Elbow - 1/2 Inch NPT

more info

£5.00

Write Review

Add:

Out Of Stock

Ball Valve 1/2"NPT W/ 1/2" Barb

more info

£15.95

Write Review

Brass Ball Valve -1/2"

more info

£12.00

Write Review

Add:

Brass Ball Valve -1/2" MPT

Brass Ball Valve 1/2" MPT 1/2" female NPT threads on the outlet, 1/2" male NPT treads on the inlet. more info

£10.00

Write Review

Add:

Butterfly Clips LARGE 1/4" - 7/8"

Handy for tightening all that loose home brew tubing. more info

£2.25

Write Review

Add:

Butterfly Clips SMALL 1/8" - 1/2"

Handy for tightening all that loose home brew tubing. more info

£2.25

Write Review

Add:

Cooler Weldless Bulkhead O-Ring Set

A replacement set of silicone o-rings for the Cooler bulkhead. more info

£1.90

Write Review

Add:

Female Quick Disconnect - 5/8" barb

Female QD/ 5/8" Hose Barb. The ID of the barb is a full flow 1/2" ID and 1/2" ID silicone tubing will stretch over the 5/8" barb... more info

£8.00 £5.60
Save: 30%

Write Review

Add:

Female Quick Disconnet - 1/2" Male NPT

This 304 stainless steel female quick disconnect easily attaches to a male QD and quickly seals. This QD features a 1/2" Male Pipe Thread on the... more info

£8.00

Write Review

Add:

Out Of Stock

Female SS Quick Disconnect with 1/2 inch barb

Connects to either a male x 1/2" NPT or male x 1/2" Female NPT more info

£8.95

Write Review

Gamlock Quick Disconnect Silcone Gasket - 1/2 inch

more info

£1.00

Write Review

Add:

Heavy Duty Weldless Bulkhead - 1/2" FPT x 1/2" FPT

more info

£10.00 £7.50
Save: 25%

Write Review

Add:

Heavy Duty Weldless Bulkhead - 1/2" MPT x 1/2" FPT

Add a bulkhead to your kettle, fermentor or any thin walled container. This bulkhead fitting has all of the seals and lock nuts you will need, with... more info

£10.00

Write Review

Add:

Jubilee Clips LARGE 10~16mm

Handy for tightening all that loose home brew tubing. more info

£0.90

Write Review

Add:

Out Of Stock

Jubilee Clips SMALL 6~13mm

Handy for tightening all that loose home brew tubing. more info

£1.00

Write Review

Kettle/Keg Weldless Bulkhead O-Ring Set

A replacement set of silicone o-rings for the kettle bulkhead fitting. more info

£1.90

Write Review

Add:

Male Quick Disconnect - 1/2" Male NPT

These male quick disconnect couple with the stainless female quick disconnects. more info

£5.00

Write Review

Add:

Male Quick Disconnect - 1/2" Female NPT

This stainless steel male quick-disconnect (QD) has a 1/2" female NPT fitting on the end for easy integration into a ball valve with a male NPT... more info

£5.00

Write Review

Add:

Male Quick Disconnect 5/8" Barbed

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 5/8"... more info

£5.50

Write Review

Add:

Premium Keg/ Cooler Weldless Bulkhead -1/2" NPT

The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for premium... more info

£8.50

Write Review

Add:

Out Of Stock

Quick Disconnect Female to 1/2" NPT Female (Stainless Steel)

When used with the Female QD these quick disconnect seal up in either flow direction. These feature are 1/2" Female National Pipe Thread on the... more info

£8.75

Write Review

Quick Disconnect Male to 3/4" NPT Male (Stainless Steel)

These male quick disconnect couple with the stainless female quick disconnects. more info

£5.00

Write Review

Add:

Silicone O-Ring 1 inch NPT

more info

£1.00

Write Review

Add:

Silicone O-Ring 1/2 inch thick

more info

£1.00

Write Review

Add:

Silicone O-Ring 1/2 inch thin

more info

£1.00

Write Review

Add:

Single Body Weldless Bulkhead 1/2 inch MPT with 1/4 inch Barb

more info

£13.00

Write Review

Add:

Single Body Weldless Bulkhead 1/2 inch MPT with 3/8 inch Barb

more info

£13.00

Write Review

Add:

Single Body Weldless Bulkhead x 1/2 inch Barb

more info

£13.00

Write Review

Add:

Out Of Stock

Single Body Weldless Bulkhead x 1/2 inch Female NPT

Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info

£11.50

Write Review

Single Body Weldless Bulkhead x 1/2" Male NPT

Use this 2 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5... more info

£12.00

Write Review

Add:

SS 1/2 Inch Barb x 1/2 Inch Female NPT

Stainless Steel 1/2" FPT To 1/2" barb can be attached to any 1/2" MPT. more info

£4.45

Write Review

Add:

SS 1/2" Barb x 1/2" Male NPT

more info

£4.45

Write Review

Add:

SS Extention 1/2 inch NPT Female x 1/2 inch NPT Male

more info

£4.50

Write Review

Add:

SS False Bottom Elbow - 3/8" Barb x 1/2" Male NPT

more info

£4.00

Write Review

Add:

SS Full Coupler - 1/2 inch NPT x 1 inch Long

Full coupler with ½ inch female pipe thread. Full couplers have threads for insertion from both sides. more info

£5.00

Write Review

Add:

SS HERMS Bulkhead 1/2" Male NPT x 1/2" Compression

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression This is a custom made weldless compression bulkhead that can be used to... more info

£13.50 £8.10
Save: 40%

Write Review

Add:

SS Union 1/2 Inch NPT Female x 1/2 Inch NPT Female

more info

£8.00

Write Review

Add:

SS Weldless Bulkhead-1/2" MPT x 1/2" FPT

For attaching ball valves, thermometers, etc to kettles with a 7/8" hole, the Weldless Bulkhead fitting proves easier to tighten with wrench(es)... more info

£12.00

Write Review

Add:

SS XL Cooler Weldless Bulkhead -1/2" NPT

This Stainless Cooler Conversion Kit is larger to accommodate coolers with thicker sidewalls. more info

£11.00

Write Review

Add:

Stainless Carbonator with 5/16" Barb

These stainless steel carbonation caps are intended to convert 1L and 2L bottles to pressurised growlers. Fill up a 1L or 2L PET bottle with... more info

£13.00 £8.45
Save: 35%

Write Review

Add:

Stainless PET Bottle Carbonator

Carbonation cap for PET bottles. Stainless steel design. No plastic parts. Works for standard PET bottles. Perfect for taking some beer on the road... more info

£12.50

Write Review

Add:

Out Of Stock

Stainless Socket Banded - 1/2 Inch

Stainless Socket Banded - Takes half inch on either side. more info

£4.45

Write Review

Stainless Steel 3/8 Elbow - 3/8" Barb x 1/2" Male

more info

£4.00

Write Review

Add:

Stainless Steel Cooler Weldless Bulkhead -1/2" NPT

The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. more info

£11.00

Write Review

Add:

Stainless Steel Dual Threaded Fitting for Wooden Tap Handles

Your custom made tap handle will be the talk of the party! You can create your own tap handle and mount it with this threaded insert. Simply... more info

£1.90

Write Review

Add:

Stainless Steel HERMS Bulkhead 1/2" Male NPT x 3/8" Compression

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info

£13.50

Write Review

Add:

Stainless Steel HERMS Bulkhead 1/2" Male NPT x 5/8" Compression

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info

£10.00

Write Review

Add:

Stainless Steel In-line Oxygenation Assembly

This is a product that many professional breweries use in their pilot systems. It is easy to use and easy to clean. Needs an additional source of... more info

£45.00

Write Review

Add:

Stainless Steel Kettle Weldless Bulkhead -1/2" NPT

Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info

£11.00

Write Review

Add:

Stainless Steel Male Quick Disconnect 1/2" Barbed

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 1/2"... more info

£5.00

Write Review

Add:

Stainless Steel Male Quick Disconnect 3/8" Barbed

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 3/8"... more info

£5.00

Write Review

Add:

Stainless Steel Nipple 1/2" NPT x 1" Length

304 Stainless Steel Nipple 1/2" X 1/2" NPT (1" in length). Used to combine two fittings with 1/2" FPT threads. more info

£4.45

Write Review

Add:

Stainless Steel Nipple 1/2" NPT x 1.5" Length

304 Stainless Steel Nipple 1/2" X 1/2" NPT (1.5" in length). Used to combine two fittings with 1/2" FPT threads. more info

£4.00

Write Review

Add:

Stainless Steel Nipple 1/2" NPT x 2" Length

304 Stainless Steel Nipple 1/2" X 1/2" NPT (2" in length). Used to combine two fittings with 1/2" FPT threads. more info

£4.00

Write Review

Add:

Stainless Steel Quick Disconnect O-Ring Replacement

more info

£0.45

Write Review

Add:

Stainless Steel Sight Gauge Adapter with Plug

Stainless sight gauge adapter with plug. It has a 1/2" MPT and 1/8" FPT to screw the sight gauge into. more info

£6.00

Write Review

Add:

Stainless Steel Temperature Bulkhead - 1/4" Male NPT x 1/4" Comp

This design is for installing a 1/4" temperature sensor through a vessel wall without welding! Single-piece design prevents the leakage and cleaning... more info

£12.00

Write Review

Add:

Teflon Tape, 1/2" W, 10 Meter

more info

£2.75

Write Review

Add:

Thru-Wall Bulkhead Fitting - SS (1/2" Female NPT)

Made from Stainless Steel, designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go... more info

£7.00

Write Review

Add:

Variable Length Bulkhead - 1/2"NPS x 2.5"L

Variable length bulkhead - This bulkhead is designed to accommodate all wall thicknesses of UP TO 1.5". The threaded nipple is straight thread... more info

£10.00

Write Review

Add:

Weldless Kettle Bulkhead - 1/2" Flat Gasket

Used in attaching fittings such as ball valves and bazooka screens to your kettle. The product total length is 2” and it uses a 3/4”... more info

£8.95

Write Review

Add:

Weldless Sight Gauge 11 inch with 1/2 inch NPT Fittings

Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info

£22.00 £13.20
Save: 40%

Write Review

Add:

Weldless Sight Gauge 16 inch with 1/2 inch NPT Fittings

Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info

£27.00

Write Review

Add:

Displaying 1 to 77 (of 77 Products)